SSRB022010 Burglary Alarm Control Panel Electrical Training Equipment Educational Equipment

SSRB022010 Burglary Alarm Control Panel Electrical Training Equipment Educational Equipment

Product Overview

This training device is an anti-theft system training device used in factories and families. It can enable students to understand and master the working principle and system composition of the anti-theft alarm system, and cultivate students’ corresponding knowledge and skills. It is suitable for higher vocational, vocational, and secondary occupations. Schools and technical schools related professional teaching and skills training assessment.

(1) The training platform adopts the aluminum profile column hanging box structure, and the operation training platform is constructed of aluminum alloy.

(2) There are complete types of sensors, which can be used in combination in a variety of ways.

(3) The overall structure adopts open type and disassembly type, which can easily replace the modules. The content of the modules is determined according to the principle of having productive functions and integrated learning functions, so that the required modules can be easily selected during teaching or competition.

(4) The training assessment device is a low-voltage component and is safe to use.

(5) The training platform has a good safety protection system.

Performance parameters

(1) Input power supply: single-phase three-wire system 220V±10% 50Hz

(2) Capacity of the whole machine: <1.0KVA

(3) Weight: <60kg

(4) Working conditions: ambient temperature -10℃～+40℃, relative humidity <85% (25℃)

(5) Safety protection: with leakage voltage and leakage current protection devices, the safety meets national standards

GENERAL CHARACTERISTICS

– A.1 Structure composed of aluminum frame

– A.2 Components with IP20 protection degree, high resistance laminate and indelible identification with rear closure.

– A.3 Fixing of components without the need to use tools.

– A.4 Electrical connections of the components using 4mm safety terminals.

– A.5 Physical connection, operation and programming of the parameters of an anti-theft alarm center.

– A.6 Understand the concept of zones.

– A.7 Connection and understanding of the operation of infrared sensors with and without cables, as well as their programming in the central unit.

– A.8 Start-up of magnetic and infrared barrier-type sensors.

– A.9 Remote manipulation by means of remote control.

– A.10 One (01) source module.

– A.11 One (01) central monitored property alarm module.

Specifications

There are 6 programmable defense zones, including immediate, delayed, 24-hour, zone follow, request to exit, key arm and disarm, silent, perimeter and other zone types. Supports up to 6 defense zones

Power supply: 10.2~15V DC power supply

Current consumption: 25 mA in standby, 60 mA in alarm

Relay Alarm Output: Type “C”, 3 Amp, 28 Volts DC/120 Volts AC

Alarm solid state voltage output: maximum current 250 mA

Terminal resistor: 10 kilohms

Working temperature: -20℃~+50℃

Dimensions: 123mm x 119mm x 30mm (DS6MX size)

– A.12 One (01) wireless or wireless infrared sensor module.

color: White

Size: 93X52X44mm

Material: ABS plastic

Working humidity: 0~95%, no condensation

Working temperature: 0’C~+49’C

Alarm indicator light: red LED

LED jumpers enable or disable lighting

Relay: Monitoring mode A normally closed (NC) contact, electrical rating: 125mA, 28VDC. 3W

Tamper switch: Normally closed (NC) contacts (with mask), Electrical rating: 125mA, 28VDC. Tamper switch circuit connected to 24-hour protection

protection circuit

Power requirements: current <25mA, voltage 9VDC~ 15VDC

Guardband detection range, and microprocessing using FSP technology

The detector can work with traditional control panels

The type of wireless communication that wireless infrared sensors have with the central unit is 433MHZ wireless communication.

– A.13 One (01) infrared sensor module with cable.

Technical Parameters:

Current (standby/alarm): 10 mA, 12 VDC.

Operating voltage: 9 VDC to 15 VDC.

Environmental specifications: Complies with EN50130-5 level 11.

Pet-proof 1: One or two pets weighing up to 20 kg (45 lbs), or multiple rodents

animal.

Relative Humidity: 0 to 95%, non-condensing, for installations with UL listed products, 0% to

85%, no condensation.

Operating temperature: -30°C to +55°C (-22°F to +130°F), for UL recognized

Certified product installation, operating temperature 0°C to +49°C (+32°F to +120°F).

color: White.

Dimensions: 105mmx61mmx44mm (4.2″x2.4″x1.7″).

Material: High-strength ABS plastic.

Radio frequency interference (RFI) immunity: When the field strength is less than 30V/m, there will be no alarm or no need to set the critical frequency in the range of 150kHz to 2GHz.

Relay: Solid State, Supervised, Form A Normally Closed (NC) Contacts, Electrical Ratings: ≤100mA, 25VDC, 2.5W, <20Ω closed

Tamper Switch: Normally Closed (NC) Contacts (Cover Open), Electrical Rating: ≤100 mA, 25 VDC, 2.5 W Tamper Switch Circuit Connected to 24-Hour Protection Circuit

– A.14 One (01) wireless and wired opening sensor module.

Detection performance

Detection distance > 17mm

interface

Alarm output: normally closed

Electrical properties

Nominal voltage ≤100 VDC (withstand voltage)

Nominal current < 500mA (withstand current)

General specifications

Working temperature -10°C~55°C

Storage temperature -20°C~60°C

Working humidity 10% ~ 90%

Shell material: flame retardant ABS

Dimensions (width x height x depth}

19.6mm x 63.5mm x 12.5mm

12.5mm x 63.5mm x 12.5 mm

Weight 26.5g

– A.15 One (01) active infrared sensor module, barrier type.

The outdoor detection range of D429i is 100 meters and the indoor detection range is 150 meters. The outdoor detection range of D426i is 60 meters and the indoor detection range is 110 meters.

1.Double beam detection

The maximum outdoor detection range is 100 meters and the indoor detection range is 110 meters.

Optional response time

Small concealed design

Technical specifications

beam

DS422i detection range indoor: 90 meters (300 feet), outdoor: 30 meters (100 feet)

DS426i detection range indoor: 180 meters (600 feet), outdoor: 60 meters (200 feet)

Response time: optional, range from 50ms to 700ms

Shell design

Dimensions: 17.1cm x 8.2cm x 8.7cm (6.75″x3.25″x3.5″).

Material: Smoked Lexan

Environmental requirements

Operating temperature: -25°C to 55°C (-13°F to 130°F)

Installation Precautions

Directivity: adjustable, horizontal to 90°, vertical to 24°

output

Relay: Alarm activated Form C relay, dry contacts, maximum rated current 0.5 A (at 30 VAC/VDC)

Anti-tamper switch: normally closed, equipped with protective cover

Power requirements

DS422i receiver current consumption: 31 mA

DS426i receiver current consumption: 31 mA

DS422i transmitter current consumption: 10 mA

DS426i transmitter current consumption: 27 mA

Input voltage: 12 VDC to 28 VDC, no polarity

– A.16 One (01) siren module.

Electrical properties

Working humidity

10%~90%

Operating temperature

-20°C ~ + 60°C

Power consumption

Static power consumption: 0.96W

Alarm power consumption: 2.7W

power supply

DC 8~ 16V 0.22A Max

General parameters

IP rating

IP54

Dimensions (width x height x depth)

140*134*33mm

shell material

PC+ABS

color

red and white or blue and white

weight

185g,

Audio parameters

Alarm volume

105dB/30cm

– A.17 One (01) remote control

– A.18 Power supply: 220 VAC 50/60 Hz single-phase.

– A.19 All the components mentioned allow us to good optimal functioning of the equipment offered.

ACCESSORIES

– B.1 Connection cables.

– B.2 User manual.

– B.3 It has a CD of practical exercises.