Model of Lift (Complete Set with PLC) Educational Equipment Lift Trainer

ZM3186 Model of Lift (Complete Set with PLC) Educational Equipment Lift Trainer

• Elevator trainer should allow users to carry out experiments about control program, structure and principal of baggage lift and passenger’s elevator;
• It should use real three-phase induction motor with electronic controlled breaker like a real elevator;

Experiments to be Performed:

• CAR’s winding machine operation exercise
• CAR’s location indication exercise
• Winding machine’s automatic stop exercise
• CAR’s high / low limit driving exercise
• Winding machine’s operation exercise
• Freight elevator’s call exercise
• Passenger elevator’s operation exercise

Technical Parameters:

Induction Motor:

• Voltage: 3Ø AC, 50/60Hz
• Rating: Continuous
• Capacity: 25W
• Brake: Electronic brake
• Reduction Gear: 30:1

Machine Structure:

• Type: 3 floor, steel move type
• Doors: 3 doors
• Car balancer: 1 Set
• Caster: 4 EA (Locking: 2 EA)

Electro Structure:

• Electronic magnetic: FOR / REV
• Limit switch: 8 EA
• MCCB (30AF, 20AT): 1EA
• Buzzer: 1EA
• Terminal point: 57 point
• Push-Button switch: 15 EA
• Pilot lamp: 9 EA
• Standard accessories with printed operation manual

The elevator trainer (model of lift) should be supplied with following PLC trainer for proper controlling (Quantity-01 set):

CPU of PLC Unit:

• Control Method: Cyclic execution of stored program, Time-driven operation, Interrupt task operation.
• I/O Control Method: Scan synchronized batch processing method (Refresh Method)
• Program Language: LD(Ladder Diagram), IL (Instruction List), SFC(Sequential Function Chart)
• Number of Instructions: LD(20EA), IL(13EA), SFC(194 EA)
• Processing Speed: 0.2/Step
• Program Memory Capacity: 128 Kbyte
• Maximum I/O Points: 512 points (With 16-pt modules), 1024 points (With 32-pt modules), 2048 points (With 64-pt modules)

Digital Input:

• Input Point: 16 Points (2 EA)
• Rated Input Voltage: DC 12/24V
• Common Method: 8 Points/1 Com
• Insulation Method: Photo Coupler Insulation

Digital Output:

• Output Point: 16 Points (2 EA)
• Rated Load Voltage: DC 12V, AC 220V
• Rated Load Current: Max 2A
• Common Method: 8 Points/1Com
• Insulation Method: Relay Insulation
• Power Module: AC 50Hz/60Hz; DC 5V/4A, 24V/0.7A
• Vibration Proof Module: Vibration proof for non-use slot
• Base: 8 slot (Maximum Number of Module Attach 8 EA)

Trainer Power Supply:

• Power: AC, 50Hz/60Hz
• Meter: 1 EA
• Main Power (Built-in Current Protection Device): 1 Unit
• P.L.C. Power (Built-in Current Protection Device): 1 Unit
• DC output power (DC 24V): 1 Unit
• Output Terminal: 4 EA

Sensor Input and Motor Device:

• DC Motor (DC 24V): 1 Unit
• Coupling: Circular Type (Hole 4 EA/Magnetic 1 EA)
• Photo Sensor (Detection Distance: 200mm): 1 EA
• Proximity Sensor (Detection Distance: 8mm): 1 EA
• Power for Sensor: DC 12V~24V

Input Signal Device:

• Non Lock Type Push Button: 7 EA
• Lock Type push button: 1 EA
• Digital Switch (BCD, 2 Digits): 1 Unit

Output Signal Indication:

• Output Lamp (DC 24V):7 EA
• Buzzer (DC 24V): 1 EA
• Segment Display (BCD, 2 Digits): 1 Unit

Digital I/O Terminal:

• Input: 32 Points (16 Points/1 COM Total 4EA)
• Output: 32 Points (16 Points/1 COM Total 4EA)
• Standard accessories with printed operation manual