Electrical Machine Lab Training Equipment teaching aid equipment Electrical Lab Equipment

ZE3209 Electrical Machine Lab Training Equipment teaching aid equipment Electrical Lab Equipment

1 Product overview

1.1 Overview

This training device includes a variety of types of induction motor and industrial control components, through the relevant experiment, students can be familiar with the operation characteristics of AC motor, DC motor, to master its control principle and control mode, the corresponding knowledge and technical skills, it is widely applied in higher vocational colleges, secondary vocational schools and vocational school related professional teaching and technical skills training program and examination.

1.2 Features

(1) The actual training platform adopts the frame structure of aluminum profile, with the bottom with the universal wheel, which can be moved flexibly. The measuring instrument and the actual training power source are integrated and installed, easy to use and not easily damaged.

(2) The motor is fully equipped and can be used in combination to complete a variety of training contents.

(3) The training platform has a good security system.

2 Performance parameters

(1) input power: three-phase five-wire system 380V plus or minus 10% 60Hz

(2) external dimension: 1600mm x 800mm x 1350mm

(3) complete machine capacity: < 1.5 KVA

(4) weight: < 320kg

(5) working conditions: temperature – 10 ℃ ~ + 40 ℃ relative humidity < 85% (25 ℃)

3 Product composition

3.1 Power control screen

The power control panel adopts aluminum alloy profile panel, closed box body structure, and the lower shelf is connected to one.

3.2 Training bench

The actual training table is supported by the aluminum profile column, and the bottom wanxiang wheel brake is flexible and can be moved and positioned flexibly. The tabletop uses the high density base plate of 25mm thick, the surface high temperature and high pressure fire prevention board face treatment, complete with three guide type drawer 2, sliding door type bottom cabinet 2 pieces, the structure is firm, beautiful and generous.

3.3 Power control screen configuration

(1) The input of three-phase five-wire power supply, controlled by the leakage circuit breaker, has the emergency stop control button, and in case of emergency, press the emergency stop button breaker to cut off the power supply.

(2) Equipped with power indicator, power output socket and secure type power supply terminal.

(3) Configuration ac motor special protection switch, built-in ac power supply, short circuit protection function.

(4) Built-in AC power and short circuit protection.

DC-Machine 1 kW 220 V 50 Hz

Induction Motor slip-ring 1.1kW 400/230V 50-60Hz 1.1kW

Synchronous Machine, 230 V Y 50 Hz 1.2 kVA x 0.8

Induction Motor Squirrel Cage, 400/230V 50-60 Hz 1,1 kW

Digital Torque-, Speed- and Shaft Power Meter

Machine Bed

Starter AC- and DC-Motors, Classic

Power Pack 3-ph, supply 400 V, out 230 V

Terminal Board

Load Switch, 3-pole 16A

Reversing Switch

Star-Delta Starter for 3-ph Machines

Shunt Regulator

Load Resistor 3-ph 3.3 kW

Load Reactor, 3-phase, 2.5 kVAr

Load Capacitor, three-phase 2.8 kVAr

Synchronizing Device 220-240 V 50-60 Hz

Flex Set, 100 Safety Leads, Safety Plugs

Mobile Test Bench

AC Power Energy Meter

DC Measuring Unit

Data Collecting Software for MV Machines

Phase Sequence Indicator

MOSFET – PWM Module

Reluctance Motor 230 V D 3-phase 50-60 Hz

Induction Motor, Dahlander 230 V 50-60Hz 0.9-1.3 kW

Dahlander Switch

Universal Motor

Synchronous Machine, salient poles, 230 V Y 50 Hz

Induction Motor,  Start 230 V 50-60 Hz

Induction Motor,  Start and run 220V 50-60 Hz

Induction Motor, 2-speed, 230 V 50-60Hz 0.8-1.0 kW

Induction Motor, Thermistor protected 400/230V 50-60 Hz

Thermistor Relay for MV 1031

DC-Machine, cut-away

Induction Motor, slip-ring, cut away.

Synchronous Machine, cut-away

Induction Motor Squirrel Cage Cut-away

3-Phase Squirrel Cage Motor with Fault Simulator

Asynchronous Motor, three-phase

DC-Tachogenerator incl. Cover